American Dryer AD90-SS Advantage Hand Dryer, Stainless Steel

Construction Features:

UNIVERSAL VOLTAGE

– The new Advantage AD series can be connected to any voltage from 100–240 volts, 50/60Hz. The dryer configures itself to your voltage, making installation easier.

HEAVY DUTY ONE-PIECE COVER OPTIONS

• Flame retardant white ABS
• Steel with white epoxy finish (M)
• Steel with black graphite epoxy finish (BG)
• Steel with satin chrome finish (C)
• Stainless Steel with #4 brush finish (SS)

VANDAL RESISTANT

– Tamper resistant screws secure cover to base. Air intake vents are shielded for additional safety.

MOTOR

– Heavy duty universal motor. 1/8 HP, 4,800 RPM. Automatic thermal protector.

AUTOMATIC SENSOR

– Ultra energy efficient microprocessor-controlled sensor turns dryer on when hands are under the outlet for up to 35 seconds. Stand by power is only one watt. RoHS compliant lead-free design.

GENERAL INFORMATION

DRYER PLACEMENT:

Dryers should be placed at least 2 feet apart and at least 12″ from washbasin. Do not install dryer over washbasin. Automatic dryers should be at least 18″ above any projection which may interfere with the operation of the automatic sensor. In congested areas the dryers should be located to create a flow from the washbasin to dryer to exit. Recommended mounting heights are shown in the table below.

DRYER INSTALLATION:

Dryers must be installed by a licensed electrician. A single phase dedicated 15 amp or 20 amp electrical line is required. Dryer must be properly grounded. One side of dryer should be mounted to a stud. All surface mount dryers are provided with conduit entrances for both in-wall and surface wiring.

QUANTITY ESTIMATE, HAND DRYER:

SHIPPING WEIGHT:

AD 8 lbs, AD-M/BG/C/SS 10 lbs

 Series hand dryers achieve up to a 95% cost savings over paper towels. These savings are realized by eliminating the maintenance and operating expenses associated with paper or linen towels.